fuses are located in rear of glove box ,remove appropriate fuse ,or check each one if youre not sure, but only remove one at atime and replace it before removing another. fuses have two flat pin connectors connected to each other inside the see thru fuse body. if fuse has blown the metal connection will be broken inside ,easy to see , replace fuse with one of the same rating as on fuse body i.e. 5,10,15 ,20 etc. . dont know about switches yet .
probably the switch stuck on. pull out fuse in mean time
Here you go http://www.peugeotlogic.com/fuses/fuses406/fuses1.htm
I've just bought a Peugeot 307 hdi. I took it back because (I thought) the right side reverse light wasn't working. The garage told me there isn't one!
The fuse for the reversing lights on a Peugeot 308 is typically located in the fuse box inside the vehicle. This fuse box is usually found beneath the dashboard on the driver's side or in the engine compartment, depending on the model year. To identify the specific fuse, consult the owner's manual for the fuse diagram, which will indicate the exact location and designation of the reversing light fuse. Always ensure to replace any blown fuses with the correct amperage to avoid electrical issues.
Parking lights may stay on after a BMW is turned off because the headlight is bad. A faulty relay could also cause this problem.
What's the question? Yes, a peugeot 106 has dashboard lights.
There is one reversing light. There is one reversing light.
On a Peugeot 406, the reversing light wires are typically green and brown. The green wire is generally the positive connection, while the brown wire serves as the negative. However, it's always best to consult the vehicle's specific wiring diagram for confirmation, as colors may vary slightly between models or production years.
how two change my front head lights on a peugeot 206
The warning lights are warning indicators meant to indicate something being wrong. When the lights turn red, it means it is in immediate need of attention.
they mean something is not right with the vehicle check your owners manual for details
I think it is fuse No. 1 but it looks like it is connected to a small integrated circuit and be alo operate the speedo. The wiring at the switch can become broken, about 100mm along the harness.