To reassemble a steering box for a 1993 Mitsubishi L200 ute, first ensure all components are clean and undamaged. Start by inserting the sector shaft and adjusting the preload with the appropriate shims. Then, install the worm gear and bearings, ensuring proper alignment. Finally, seal the box with a new gasket, and refill with the recommended steering fluid before securely fastening all bolts.
Follow the top hose back to the thermostat housing.
Turn the steering wheel back and forth if that doesn't work try that screw under the steering column
Back left corner of valve cover on 2.0L engines. it is screwed in.
The 1993 Chevrolet Astro Van power steering reservoir can be found on the back side of the engine. The power steering reservoir will be between the engine and the firewall.
Mine did it because of a horrible alignment
Flasher is bad. to replace it it is under the dash at the back of the steering column.
The pressure switch is located on the back of the power steering pump which is on the passenger side of the car at the rear of the engine. You can reach it from top or bottom but I found, to take it out it is easier to reach from under the car. It is the only part of the power steering pump that has a wire going to it.
Remove the panel directly under the steering column. It is located just back in there.
Since 1993(19 years)
How do I get a diagram of how to rebuild the steering column on a 1990 dodge ram 4x4, tilt wheel
took steering off to fix my blinker now Im haveing problems putting it back together vcan you help
I had to do my 94 and it was tough to get the fitting on back of pump but the rest was EZ .