0
What else can I help you with?
Where is the camshaft position sensor on a 2002 Dodge Intrepid?
CRANKSHAFT POSITION SENSOR The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing Crankshaft Position Sensor The bottom of the sensor sits above the drive plate REMOVAL Disconnect electrical connector from crankshaft position sensor. Remove sensor mounting screw. Remove sensor. INSTALLATION Install sensor and push sensor down until contact is made with the transmission case. While holding the sensor in this position, install and tighten the retaining bolt to 12 N·m (105 in. lbs.) torque. Connect electrical connector to crankshaft position sensor.
Where is the crankshaft posion sensor in a 92 civic?
Remove the engine brush cover under the front of the engine. Remove the drive belt to make changing the sensor easier (optional). Remove the lower timing belt cover and the crankshaft pulley to access the crankshaft position sensor. Disconnect the electrical modules from the crankshaft position sensor, located next to the alternator. Take off the bolts with a socket wrench and remove the sensor.
How do you remove a crankshaft position sensor gear?
Press off the balancer .
Where is the crankshaft position sensor on a 2001 Chevy Tahoe with a 5.3?
The crankshaft position sensor is located right above the starter, you may have to remove the starter for better visibility.
Where is the crankshaft position sensor located on a 1998 Mitsubishi Eclipse?
Crank position sensor is located next to the crankshaft. In order to replace it you might have to remove the timing belt. In the most models you just can remove remove the timing belt cover and replace the sensor.
Where is the crank position sensor for 1997 Chevy Malibu?
The 1997 Chevy Malibu crankshaft position sensor can be found on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft position sensor.
Where is the crank position sensor on a 94 Volvo 850 turbo?
The 1994 Volvo 850 crankshaft position sensor can be found on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft position sensor.
Where is the crankshaft position sensor and the camshaft position sensor located on a 2000 omega?
opel omega crankshaft sensor is located next tp the oil filter atached with a star shaped screw, to remove it you have to remove the oil filter first. or the muffler.
Replacing a crankshaft sensor on a 2000 Chevy Malibu 3.1?
24x crankshaft position sensor--remove drive belt, raise vehicle up in front ( car ramps etc. ) remove the crankshaft pulley, remove the bolt and sensor wiring harness retaining bracket. remove the 24x crank sensor mounting bolts, remove the sensor and withdraw the wiring harness. for 3.1 V6 the 2.2 has a 7x position sensor. good-day !
Were is Crankshaft position sensor located?
where is crankshaft position sensor and camshaft position sensor on a 2004 Jetta 2.0 gl
Where is the crankshaft sensor located on a Mazda B2500?
Hello! The crankshaft position sensor is located behind the crankshaft pulley,on the left side facing the front of the car.It is difficult to see and to remove it you need to remove the crankshaft pulley ( radiator,belts,.... )
Where is the crankshaft position sensor 2002 VW Cabrio?
the position off the crankshaft sensor
