To remove the brake calipers on a 2004 Mercury Monterey, start by safely lifting the vehicle and removing the wheel. Next, locate the caliper bolts on the back of the caliper and use a socket wrench to remove them. Once the bolts are removed, carefully slide the caliper off the brake rotor, and support it to avoid straining the brake line. Finally, if necessary, disconnect the brake line from the caliper for complete removal.
Lift the vehicle on a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Put in the new brake pads, replace the brake shoe/calipers, replace the calipers, and lower the car.
Lift the vehicle with a jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the vehicle.
Lift the car, remove the car tires, remove the brake shoe/calipers and remove the old brake pads. Put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.
9mm
Lift the car on a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, dispose of the old brake pads, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.
Lift the vehicle on a vehicle jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.
Lift the car on a jack, remove the car tires, remove the brake shoe/calipers and remove the old brake pads. Properly dispose of the old pads, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.
The easiest way is with a "C" clamp.
Lift the car with a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.
Lift the car, remove the tire and set aside, remove the brake shoe/calipers and remove the old pads. Replace the old pads with the new pads, replace the brake shoe/calipers, replace the tire and lower the car.
1. Take the tire off 2. Take the brake calipers off. (there are 2 bolts on the back side of the calipers) then you can remove the calipers and rotors.
I am going to suggest that you DO NOT interchange parts that control your safety in a vehicle. Calipers are not that expensive. Just get the ones you need.