To remove the harmonic balancer on a 1993 Buick Century, first, disconnect the battery and remove any components obstructing access, such as the serpentine belt. Next, use a harmonic balancer puller tool to carefully extract the balancer from the crankshaft. Ensure you remove any bolts securing it in place before using the puller. Finally, clean the crankshaft and inspect for damage before installing a new balancer.
Crankshaft Pulley !
Standard.
It is located by the harmonic balancer right next to it to remove it you must take the hb off to properly take it off...
It might be the harmonic balancer (crankshaft pulley) has gone bad. They tend to go on Tempos after ~50-60K. A new one will cost around $200 installed.
Yes, they did for all those years, not sure where at, possibly by the harmonic balancer?
I believe that is 7mm Allen key.
crank sensor is bad... it's under the harmonic balancer wheel by the oil pan
if it is the motor splash guard it attaches to the inner fender well on the passenger side and protects the front of the motor where the harmonic balancer and belts are
Ford 5.0L V-8s have the timing pointer at the bottom of the timing cover on the vehicle's right side of the harmonic balancer. Look behind the crankshaft pulley (the biggest one, it's at the bottom in the center of the engine). This is bolted to front of the balancer.
how do you replace front door actuator for 93 ford tempo
Remove - battery cable Raise and support vehicle Remove wiring harness at the top of the starter Remove mounting bolts Remove starter