0
What else can I help you with?
What is the rear axle to axle width on a 69 GTO 10 bolt?
The Rear Axel for a 1969 Pontiac GTO is 60"
How do you replace rear axle seal1965 gto?
To replace the rear axle seal on a 1965 GTO, start by safely lifting the vehicle and removing the rear wheels. Next, remove the axle housing cover and drain the differential fluid. Remove the axle retaining bolts, pull the axle out carefully, and replace the old seal with a new one, ensuring it's properly seated. Finally, reassemble the axle, refill the differential with fluid, and reinstall the wheels.
Where is the gto axle stub?
Newer GTOs are not one of my strong suites... It appears the axle stub refers to axles for independent rear suspension cars. Check out the link.
Rear axle casting number 9779822 what does it go to?
I know that this rear is a gm standard 10 bolt, and Pontiac used it in the 64-66 gto, tempest, and le mans.
Where is evap canister on a 2004 GTO?
Just behind and above rear pumpkin? good luck
Where is the radiator drain pulg on a 2004 Pontiac gto?
Unlike most cars , the 2004 Pontiac gto does not have a drainage plug. Due to this inconvenience, the only way to drain the radiator is to remove it.
Where is the starter located at on a 2004 Pontiac gto?
On a 2004 Pontiac GTO, the starter is located on the passenger side of the engine, near the transmission bell housing. It is positioned underneath the car, towards the rear of the engine block, making it somewhat difficult to access. To reach it, you may need to lift the vehicle and remove any obstructing components, such as the exhaust or heat shields.
Will a 2006 gto hood fit a 2004 gto?
I bought a 2006 hood for my 2004 GTO and it fit perfectly. No problem what so ever.
How do you get headlight assembly out of 2004 gto?
you have to remove the front fascia along with removing the three bolts that are easy to see.
What tools are needed to change rear brake pads on a 2004 Pontiac GTO?
To change the rear brake pads on a 2004 Pontiac GTO, you will need the following tools: a lug wrench to remove the wheel, a C-clamp or brake caliper tool to compress the caliper piston, a socket set or wrench to remove the caliper bolts, and possibly a torque wrench to ensure proper reassembly. Additionally, having a brake cleaner and a bungee cord or rope to hold the caliper up while working can be helpful. Always ensure you have safety equipment, such as gloves and goggles, for protection.
2005 Pontiac gto transmission?
The automatic transmission in the 2005-2006 GTO was the Hydramatic 4L65E, as opposed to the 2004 GTO with the Hydramatic 4L60E. The manual transmission was for the 2004-2006 GTO was the Tremec T-56 with M12 gearset.
How much horespower does a 04 gto have?
The 2004 gto has 350 hp coming from the engine but that is not rwhp.
