Remove the wheels Remove the caliper mounting bolts Slide caliper off rotor Rotor should slide of center hub
how to change rotor front disc on 2006 sprinter
Remove the wheel, remove the brake caliper and the caliper adapter bracket, pull the rotor off of the wheel studs.
To remove the rear rotor from a 2006 Jeep Commander, first ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel and brake caliper by unbolting it from the caliper bracket, then hang it out of the way without stressing the brake line. Next, remove the caliper bracket to access the rotor. Finally, if the rotor is stuck, gently tap around the edges with a rubber mallet or use a rotor puller, then slide the rotor off the axle hub.
remove wheelremove brake caliperremove rotor
there should be two threaded holes visible on the rotor hat . You can thread bolt into the holes with a ratchet to push the rotor off the hub
i have 2006 endeavor changing brakes do i have to remove the two screws in the rotor to remove so i can have resurfaced
The 2006 Subaru Outback has 16 valves.
The 2006 Subaru Outback is a gas-powered vehicle.
The 2006 Subaru Outback has a 5-speed manual.
The 2006 Subaru Outback has a flat 4 engine.
remove tire remove two bolts that hold the caliper on the inside of the rotor lift the caliper off then the rotor just slides off it may be stiff so you can tap it with a soft mallet