To remove the flywheel on a 2005 Honda Rancher 350, first, disconnect the battery and remove any necessary covers to access the flywheel. Use a flywheel puller tool to attach to the flywheel, ensuring it is threaded correctly. Then, turn the puller’s center bolt to apply pressure and gradually pull the flywheel off the crankshaft. Finally, be cautious of any key or spacers that may be present and ensure you keep track of all parts for reassembly.
You don't... There are no performance part made for this motor. It is the Bic lighter of engines, throw away when used up.
you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points, you have to remove the flywheel, take engine cover off, remove flywheel, its under it, next to the points,
To install the clutch on a 1987 Honda Civic the transmission will need to be taken off. Remove all the components to drop the transmission. Once removed loosen the bolts that hold the flywheel and clutch disks. Replace the parts.
How do you remove the flywheel on a 1999 ford ranger
automatic? remove transmission and torque converter then remove flexplate (auto has a flexplate not a flywheel if mauel transmission remove gear box and clutch then remove flywheel
remove starter remove transmission unbolt flywheel
remove the enigine and then take out flywheel bolts
Remove the trany and you will see the flywheel bolted to the rear of the motor. Remove the bolts & replace the flywheel. Check the starter as a bad starter can chew the teeth off of a flywheel very quickly.
Near Flywheel
The Astro does not have a flywheel, it has a flexplate. To remove it you have to remove the transmission so you can unbolt it from the crankshaft.
You need to take the left side cover off the engine and use a puller to remove the flywheel. Then you will access to the stator.