0
My 01 1500 4x4 has 2 13/16" hex bolts. Spray with penetrating oil first and use a breaker bar with your 3/8 or 1/2" ratchet, those puppies require lots of leverage to break loos. I use an 18" piece of 3/4" (inside diameter) black steel pipe to slip over the ratchet handle.
What else can I help you with?
Why do my front brakes keep locking up on a 1984 Dodge pickup?
it is possible that your brake hoses are bad and soft not letting the brake fluid back out of your calipers
Changing brake pads 2002 dodge pickup?
how do change brake pads on a 2002 dodge pickup 4x4
How do you change the brake pads on a 1998 dodge stratus?
Lift the car, remove the tires, remove the brake shoe/calipers, and remove the old brake pad. Put in the new brake pads, replace the brake shoe/caliper, replace the tire and lower the car.
How do you change rear brake pads on Daewoo Leganza?
Lift the vehicle on a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Put in the new brake pads, replace the brake shoe/calipers, replace the calipers, and lower the car.
What size socket to remove bolts on the calipers when replacing brake pads on a 1997 Dodge Ram 1500?
3/8 inch Allen
Remove the rear brake calipers on a 2009 Dodge Journey?
To remove the rear brake calipers on a 2009 Dodge Journey, start by safely lifting the vehicle and removing the rear wheels. Next, locate the caliper mounting bolts on the back of the caliper and use a socket wrench to remove them. Carefully slide the caliper off the brake rotor, supporting it to avoid putting stress on the brake line. Finally, secure the caliper with a bungee cord or similar to prevent it from hanging by the brake line while you work.
How do you remove rear brake drum from a 1993 Toyota pickup?
How do you remove rear brake drum from a 1993 Toyota pickup?
How do you change brake pads and rotors on 2005 dodge durango with 4 wheel drive?
You will need to remove the tire and wheel from your 2005 Dodge Durango. Remove the brake pad Springs and calipers. Tap the rotors with a hammer to loosen them. Slide the rotors off. Reverse the process to install the new rotors and brake pads.
How do you change rear brake pads on a 2000 Toyota Corolla?
Lift the vehicle with a jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the vehicle.
How do you change back brake pads on 93 Pontiac grandam?
Lift the car, remove the car tires, remove the brake shoe/calipers and remove the old brake pads. Put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.
How do you replace the calipers on a 1999 Dodge Ram?
FIRST, YOU REMOVE THE TIRES THEN YOU GET EITHER 3/8 OR 10 MILLIMETER HEX SOCKET TO REMOVE THE CALIPER. REMOVE THE BRAKE LINES AND PULL HER OFF. INSTALLATION IS REVERSE
How do you replace calipers on a dodge avenger?
remove the caliper slider bolts and the brake hose then put the new caliper on, dont forget to bleed the new caliper and top off brake fluid when finished
