To replace the washer bottle in a 1998 Hiace van, first, disconnect the battery for safety. Remove any screws or clips securing the old washer bottle, then disconnect the hoses and electrical connectors. Install the new washer bottle by reversing these steps, ensuring all connections are secure. Finally, refill the bottle with washer fluid and reconnect the battery.
yes it can
The window washer pump should be located in the bottom of the washer reservoir for the 1998 Sable. The reservoir may have to be removed to replace it.
Do you mean "how do I replace washer line"? They are just rubber hose from the washer fluid container to the wipers. If you have a leak, you can get a plastic splice and put it in at the split to repair.
Replace it with new tubing.
how to fine timing marks on a 1998 hiace disel van 2l
A windshield washer pump on a 1998 Dodge Avenger ES is screwed onto the bottom of the washer fluid canister that holds the washer fluid.
... I am wondering the same thing. I need to replace mine in a '96. ... I am wondering the same thing. I need to replace mine in a '96.
In a 1998 Toyota Hiace, the fuse for the clock is typically located in the fuse box under the dashboard on the driver's side. Check the fuse diagram on the cover of the fuse box to identify the specific fuse associated with the clock, which is often labeled as "clock" or "accessory." If the clock is not functioning, inspect this fuse for any signs of damage or a blown filament and replace it if necessary.
Windshield washer nozzles normally don't need replacing, If they are clogged, run a real fine wire through the opening to unclog them.
hi, I have a 1998 town and country AWD and I add rear washer fluid in the same place as the front wipers as they use the same bottle, Hope this helpsb
been looking for this myself, the super custom has a steel clip like a door barrel retainer holding it in... you need to remove the dash to do this, there is no other way.... i believe the hiace is the same....
To replace the windshield washer pump in a 1998 Pontiac Sunfire GT, start by disconnecting the negative battery cable for safety. Remove the washer fluid reservoir by unbolting it, then disconnect the hoses and electrical connector from the pump. Replace the old pump with a new one, reconnect the hoses and electrical connector, and reattach the reservoir. Finally, reconnect the battery and test the pump to ensure it's working properly.