0
What else can I help you with?
Why is your dodge magnum leaking oil?
Usually when you leak oil that's an indication that the intake manifold gaskets need to be replaced or your intake manifold is shot.
How hard is it to replace head gaskets on 2002 dodge ram?
You must remove the intake manifold, disconnect the exhaust manifolds, and then remove the heads. This is a major repair that takes skill and knowledge. Unless you know what you are doing this repair is best left to a professional.
How do you remove the intake manifold on a Dodge Magnum?
To remove the intake manifold on a Dodge Magnum, first, disconnect the battery and remove any components obstructing access, such as the air intake and throttle body. Next, detach the fuel lines and vacuum hoses, and unbolt the manifold from the engine block. Carefully lift the manifold off, ensuring that any gaskets or seals are removed with it. Be sure to follow a service manual for specific torque specifications and procedures for reinstallation.
Can you replace a 2 barrel carb on a 1966 440 dodge to a 4 barrel?
yes you can but you will have to get a 4bbl. intake manifold and install it.
Should you clean or replace the Intake Manifold on a 2008 Dodge Avenger 2.4 engine?
Need to know what the diagnoses or symptoms are.
Can you put a Dodge 5.2 intake manifold on a 3.9 Dodge engine?
No.
Where is the temp sensor on Dodge Dakota?
On the intake manifold
Do you need new gaskets when you replace your dodge rams transmission?
Yes, always replace gaskets on any projects requiring them.
Wher is the intake manifold runner control valve on a 2008 Dodge Avenger?
Finding the intake manifold runner control on a Dodge Avenger is easy. It is located near the engine.
Where is the check valve to heater control on a 1998 dodge ram 1500?
Passenger side of the intake manifold.Passenger side of the intake manifold.
Does a 1994 dodge ram 1500 have an egr valve?
Yes, back of intake manifold.Yes, back of intake manifold.
How do you clean blocked intake manifold egr tubes on 2002 dodge stratus rt 3.0?
To clean blocked intake manifold EGR tubes on a 2002 Dodge Stratus RT 3.0, first, remove the intake manifold to access the EGR tubes. Use a wire brush or pipe cleaner to gently clear any carbon buildup in the tubes. For more thorough cleaning, soak the tubes in a carburetor cleaner or a suitable degreaser, then rinse and dry them thoroughly before reinstallation. Finally, ensure all gaskets are replaced and reassemble the manifold securely.
