0
What else can I help you with?
Why do your headlight work but your left side high beam will not come on my 1994 Nissan maxima?
replace the high beam bulb
How do you replace the low beam bulb on a 1997 Honda Accord LX 4-door?
Unscrew the Bolts, however there may be from the inside. Turn left to loosen then twist off and replace bulb.
How do you replace the Left high beam headlight bulb on 2003 Mazda 6?
To replace the left high beam headlight bulb on a 2003 Mazda 6, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the bulb and remove the rubber cover. Twist the bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring not to touch the glass with your fingers. Reassemble by reversing the steps and test the new bulb to ensure it works.
Left highbeam and highbeam indicator not working on 2001 Honda Civic No problem with fuses and bulbs?
i had same problem,but i connect high beam of right hand side wire with left side high beam wire(by using extra wire between them) it is working like this__ i i ( left hand beam bulb)i i
93 Geo right low beam doesn't work but the left does and the high beams work for both?
You probably just have a burned out light bulb. Look at the back of the sealed headlights. You will see two connectors, one for the high beam and one for the low- beam. To remove the light bulb turn the bulb holder counter clockwise until it releases. Replace the bulb and holder. Make sure you don't get oil from you hands on the bulb or it may shorten the operating life.
Right side has lights left side only has low beam?
Replace the left size high beam light.
How do you replace the headlight bulb located on a 1998 Acura CL?
If it is your low beam buy 9006 bulb. If it is your high beam buy 9005 bulb. Under the hood on left front side you will notice the back of the headlight assembly. In the center will be the bulb, turn it to the left or the right and take out...replacement is reverse from removal with a new bulb making sure you do not touch the new bulbs glass. The right side is the same accept for a plastic cover near air filter, use your discretion on taking off this cover it is not hard and the procedure is the same as the left side of the car.
How Replace brake light suburban?
expose back of bulb, turn to the left, replace bulb, return to socket, turn to the right
1996 Eddie Bauer left side no low beam but hi beam works?
Have you checked the bulb , it has 2 filaments in it , see if one of the wires is broken
What has to be done to replace the low beam bulb on a 2000 VW Beetle?
open the hood and there is a hook like lever close to where u see the headlight housing move it down and then remove the bulb lens and or as i call it the eye ball then un plug the wiring harness from the low beam by depressing on the tab and then take the grey schroud off the back of the light housing there are tabs along the sides of it then to get the actuall bulb out u have to push down a springy wire then move it to the left and the walla wiggle the bulb out by tugging on the wire a bit then reverse the process and then u have replace your lowbeam headlight bulb
How change license plate bulb?
gently insert a small flat head screwdriver on the left side of the bulb plate a push to the left.... the entire should bulb frame will shift to the left and then you can pull the frame out to replace the bulb....
Why do your left rear tail light and blinker not work on your 1997 suburban?
Bulb is blown. Replace bulb.
