take the top cover off the engine. the sensor is rectangle shape and is to the right towards the throttle body.
under the silver engine cover ...next to fuel regulator
Passanger side under dash next to computer
The map sensor is easy to replace. It is right under the air cleaner I believe. # Remove the air cleaner. # Take out mounting screws. # Disconnect nipple hose and cable. # Reverse directions for new map sensor.
To replace the MAP sensor in a 1998 Cadillac Eldorado with a Northstar engine, first, ensure the engine is off and cool. Locate the MAP sensor, which is typically found on the intake manifold; disconnect the electrical connector and remove the mounting screws. Replace the old sensor with the new one, secure it with screws, and reconnect the electrical connector. Finally, start the engine to ensure the sensor is functioning properly.
Where is the MAP sensor located on a 2003 Cadillac DevilleRead more: [[Q/Where is the MAP sensor located on a 2003 Cadillac Deville#ixzz2R1XaEPL2|http://wiki.answers.com/Q/Where_is_the_MAP_sensor_located_on_a_2003_Cadillac_Deville#ixzz2R1XaEPL2]]
how to replace a map sensor on a 2004 dodge intrepid.
In the ECM under center of dash.
can you tell me were the map sensor
E30 means the Idle Speed Control motor rpm is out of range, E31 is a shorted MAP sensor circuit. They are probably both related to a bad MAP sensor so replace it first.
In many cases for this generation, your top cover has a total of 12 screws with a torx head on them. Remove those and you will see the sensor to the right. Replace and re-install.
p0108 is map sensor signal high. Replace map sensor
Intermittant map sensor