To replace the rear top brake light in a Renault Megane, first, open the tailgate and locate the light assembly. Remove the cover or access panel if necessary, then disconnect the electrical connector. Twist the bulb holder counterclockwise to remove it, replace the old bulb with a new one, and reassemble the components by reversing the steps. Finally, test the new bulb to ensure it’s working properly.
It could fit a T10.
The probable cause of the brake lights not working on your Renault is the brake light switch. The brake light switch can be found under the dashboard by the foot pedal.
did you figure out how to? mine has the same problem
In order to reset the airbag light on a Renault Megane, you will need to take your vehicle into an auto body shop. You cannot reset it yourself.
i have renult megane cabrolete the car been standing for 10 months not been used the airbag light on why
You need a scan tool.
To change the reversing light bulb on a Renault Megane 3, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips securing the light assembly and gently pull it out. Twist the bulb holder counterclockwise to release it, then replace the old bulb with a new one. Reassemble the tail light by reversing the steps and ensuring everything is securely fastened.
From a megane owner: This is usually because of a wiring fault that can be repaired at you dealership. Not a DIY job!!
Replace the whole unit - it's got LED inside, not bulbs unfortunately
To change the high-level brake light on a Renault Espace, first, ensure the vehicle is turned off and the keys are removed. Open the tailgate and locate the access panel or screws that secure the high-level brake light assembly. Remove the panel or screws, disconnect the old light bulb or assembly, and replace it with a new one. Reassemble the access panel or screws, and test the brake light to ensure it’s functioning properly.
in my renault cabriolet it was my glow plugs.1 glow plug wasnt working.
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.