To replace the serpentine belt on a 1998 Volvo S70, first, ensure the engine is off and cool. Locate the serpentine belt tensioner and use a wrench to relieve tension on the belt, allowing you to slide it off the pulleys. Then, remove the old belt and route the new belt according to the diagram usually found on a sticker in the engine bay. Finally, reapply tension using the tensioner and double-check the belt's alignment before starting the engine.
The 1998 Camry did not have a serpentine belt. Do you have a 1998 Corolla?
how much cost to replace radiator on 1998 volvo v70
Replace it.
were should i satart when replacing the alternator in a Volvo s70 1998 were should i satart when replacing the alternator in a Volvo s70 1998
1998 VOLVO S70 Headlamp Switch
no
You don't repair a serpentine belt. You replace the worn or broken belt with a new one.
I found this information with a diagram of the serpentine belt. Hope it helps.
Maybe $100 tops....
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
Be sure you get the right replacement wiper blade. The 1998, 1999, 2000 Volvo s70 takes 21" replacement windshield wiper blades on both sides front.
Be sure you get the right replacement wiper blade. The 1998, 1999, 2000 Volvo s70 takes 21" replacement windshield wiper blades on both sides front.