youre best bet is to pull the motor. I had to to do my clutch. these cars are hard to work on. no room for anything.
Cost of clutch and labor will be in the neighborhood of $500.00
Professionally, it will cost around $2,000 to replace a broken shifter and clutch in a 96' Chevy Beretta. Just the replacement clutch and shifter will end up costing you around $800.00.
How do you replace the ignition distributor on a 93 mx6 v6 pics?
Metal piece was from the end of the clutch cable.
YOu need to blead the system .. then it should require no adjusting
in the clutch master cylinder
To replace the clutch on a 1988 Mazda MX-6, first, disconnect the battery and lift the car for access. Remove the transmission by detaching the drive shafts, shifter linkage, and any necessary brackets or mounts. Once the transmission is out, take off the old clutch and pressure plate, clean the flywheel, and install the new clutch components. Finally, reassemble in reverse order, ensuring everything is aligned correctly before reconnecting the battery and testing the clutch operation.
Replace clutch cable on sportsbike
It cost me about $120 for a lifetime warranty clutch from Autozone, and then the average estimate for installation is about $350. You could also do it yourself for just the price of the clutch and a few new tools, but that depends on how much of a grease monkey you are.
Take out the old ones and replace them with new ones.
what is cost to replace a clutch in a BMW Z3
The '96 200sx has no fluid for the clutch. This car has a cable operated clutch that needs to be adjusted. If the cable breaks the clutch will not disengage. If the clutch is getting tight it will need lubed. If lubing the cable doesn't work a new cable is needed.