To replace the fuel pump on a 1989 Dodge Dakota, first, disconnect the negative battery cable and relieve the fuel system pressure by removing the fuel pump fuse and running the engine until it stalls. Next, access the fuel pump by either removing the fuel tank or, if applicable, accessing it through a panel in the bed of the truck. Disconnect the fuel lines and electrical connections, then remove the fuel pump assembly. Install the new pump by reversing the removal steps, ensuring all connections are secure before reconnecting the battery and testing the system.
Drop the fuel tank, (thats where its located). pull the pump out of the tank and replace with the new one.
On Dodge Dakota it is integral to the fuel pump module and located inside the fuel tank. The filter itself is not serviceable or replaceable. To replace the filter, you must replace the entire fuel pump.
The fuel filter on the 1999 Dodge Dakota is a combination Fuel Filter/Pressure Regulator. It is mounted to the top of the Fuel Pump which is mounted on the fuel tank. You must remove the fuel tank to change the fuel pump. Depressurize the fuel system, Drop the tank, replace the pump.
No
To replace the fuel pump on a 1992 Dodge Dakota, first, relieve the fuel system pressure by removing the fuel pump relay and starting the engine until it stalls. Next, disconnect the battery and drain the fuel tank. Remove the tank from the vehicle by unbolting it and disconnecting the fuel lines and electrical connections. Finally, replace the old fuel pump with a new one, reassemble the tank, and reconnect the battery and fuel relay.
It is in the fuel tank.
It is in the fuel tank.
It is inside the fuel tank.
Inside the fuel tank.
No
The filter is integrated into the fuel pump module, located inside the fuel tank. To replace the filter, you must replace the entire fuel pump module. (not one of Dodge's more intelligent designs) To replace that module, you must first either remove the fuel tank or the truck box.
A Dodge Dakota does not have a reset button. The fuel system is computer controlled with relays.