0
Drill through the lock. There is a "gear" on the back of the lock. Try not to drill through it. After you drill through the lock you can use a screwdriver to turn that gear to the right position (RUN or ACC )depending on what kind of car you have. Then all you have to do is remove the steering wheel and mis. parts to get to a screw that holds the ignition switch in. Then remove the lock and install the new one.
What else can I help you with?
Why can you remove the ignition key from a 1998 Eclipse without turning off engine?
The key and the ignition lock are badly worn. Try a different key if it doesn't fix it you need to replace the ignition lock.
How do you remove ignition lock key without key?
Removing a ignition lock cylinder from a 2002 ford windstar with no key
What do you do if the key is stuck in the igniton of a 1995 Plymouth Neon and it will turn the car on and off but not come out?
this is caused by ignition lock cylinder failure, you will have to replace the ignition lock cylinder and key.
What do you do if the key is stuck in your Acura Vigor switch?
Replace your ignition lock assembly.
What do you do if you broke your car key in the ignition?
Call a locksmith. They have the tools necessary to take the lock apart and pop the key out. Or at least they have the tools to pull the key out - perhaps without taking anything apart.
Would you replace both the Steering Lock Assembly and or just the ignition lock tumbler for a 1983 Mercedes 300 SD that you have to jiggle the steering wheel to get the key to turn in the ignition?
Replace just the steering lock unit. The tumblers are old, and they need to be replaces. After replacing the lock, go to a locksmith, and have him re-key the doors to match your new ignition lock.
How do you remove a lock cylinder from a ignition swith without a key on a 1965 Chevy?
Without the key you are going to have to drill it out.
How do you replace ignition lock cylinder on a 2004 Chevy aveo?
I broke my key in the ignition and cant get it out. My only option I can see, is to replace to tumbler. How do I remove it?
I noticed an answer on how to replace Ignition Lock for 1995 Ford by inserting key turning to on position and proceeding However have lost key and wish to install new Lock Set What now?
The only way to remove the lock is with a key, you will need to get a locksmith to make a key to the old ignition so you can install the new lock set. Forcing the lock forward will damage the column and could be very expensive to replace.
How do you remove the key from the lock ignition?
1996 rodeo- how to remove key from lock ignition?
Where can you get an ignition key for your 1994 Ford Aspire?
You can have one made but it isn't cheap. Or replace the ignition lock with one from a junk yard. Though I had the same problem, new key $125, used lock $60, but found the key.
Why does your 2000 F250 start without the key?
The ignition lock seems to be broken.
