how much to replace the transmission line in 2006 Chevy impala
Must remove line and replace with same type break line. Then bleed the system. There are no shortcuts.
how do you replace hydraulic line on a 1997 s-10
There is no set millage for when you should replace a manifold line and accumulator. Most mechanics only replace when the accumulator and/or manifold lineÊstart to fail.
NO!
If I had to replace a fuel line I would get a replacement out of a car in a wrecking yard and install that.
How do i replace brake lines on a 2000 grand am
To replace the line on a Ryobi Expand-It weed trimmer, first, remove the spool cover and take out the old line. Cut a new piece of line to the appropriate length and feed it through the holes on the spool. Wind the line evenly and securely onto the spool, then replace the spool cover.
Length of back brake line to replace. hole in it between front and back door
replace the line and fill and bleed breaks.
First, Inspect the line to see if is in good condition and what was the reason for the leak, if the reason was rust spot is easier to replace the bad section, if it has more then one spot replace the whole length of the line and do a good fluid bleeding.GOOD LUCK!!:-)REPLACE ENTIRE LINE- IF IT IS DETERMINED THAT RUST IS THE PROBLEM, THEN IT WOULD BE SAFEST TO REPLACE ALL LINES
Replace and bleed line