answersLogoWhite

0

how do you replace hydraulic line on a 1997 s-10

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you adjust a hydraulic clutch on a 1993 Chevrolet pickup truck?

You can't, There is no adjustment. You either have a bad clutch slave cylinder, are worn out clutch parts.


How do you replace the fan clutch on a 1997 Chevrolet S10 pickup?

Usually there are 4 nuts holding the clutch and fan on to the water pump shaft. Just pull the nuts, remove the fan clutch and replace it.


How do you adjust the clutch on a 1985 custom deluxe pickup?

no adjustment on hydraulic clutch, worn clutch disc and pressure plate


Where is the clutch slave cylinder on a 1994 pickup truck?

The clutch slave cylinder , for a hydraulic clutch , is inside the manual transmission bellhousing


Is there a slave cylinder in a 1982 pickup?

If the clutch is hydraulic, yes. If the linkage is mechanical, no.


How can a adjust the clutch pedal on my 1993 Chevy s10 pickup to make it disengage the clutch closer to the floor?

where and how to adjust clutch pedal 1993 s10 It is hydraulic operated, there is no adjustment.


How do you adjust the clutch on a 1988 Nissan pickup?

Its hydraulic ,you cant,check your slave cylinder to see if its leaking,its located thru a rubber cover on side of transmission,if leaking replace and bleed,also check clutch master cylinder,if not leaking,then you might need a new clutch kit.


How do you change the master cylinder on a hydraulic clutch on a 93 Chevy cheyenne 1500 pickup?

To change the master cylinder on a 1993 Chevy Cheyenne 1500 pickup with a hydraulic clutch, first, disconnect the negative battery terminal. Then, remove the clutch fluid reservoir cap and drain the fluid. Unbolt the master cylinder from the firewall, disconnect the push rod from the clutch pedal, and remove the hydraulic lines. Install the new master cylinder by reversing these steps, ensuring all connections are secure and refill the reservoir with the appropriate hydraulic fluid.


How do you adjust clutch on a 1983 k20 Chevy pickup?

There is NO adjustment. It is adjusted automatically through the hydraulic slave cylinder. Probley time for a NEW clutch kit.


How do you replace the fan clutch on a 1994 Nissan Pickup V6?

the fan clutch is built into the water pump,it cant be separated,you have to replace the water pump.


What type of clutch fluid for a dodge 1959 pickup?

A 1959 truck has a mechanical clutch. A 1995 truck uses Dot 3 brake fluid for the hydraulic control.


Why would a 1986 smaller size pickup truck have 2 brake fluid reservoirs?

Does it have a manual transmission with a hydraulic clutch ?