answersLogoWhite

0

You can't, There is no adjustment. You either have a bad clutch slave cylinder, are worn out clutch parts.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you adjust the clutch on a 1985 custom deluxe pickup?

no adjustment on hydraulic clutch, worn clutch disc and pressure plate


How do you replace the hydraulic clutch line on a 1997 Chevrolet S10 pickup?

how do you replace hydraulic line on a 1997 s-10


How can a adjust the clutch pedal on my 1993 Chevy s10 pickup to make it disengage the clutch closer to the floor?

where and how to adjust clutch pedal 1993 s10 It is hydraulic operated, there is no adjustment.


How do you adjust clutch on a 1983 k20 Chevy pickup?

There is NO adjustment. It is adjusted automatically through the hydraulic slave cylinder. Probley time for a NEW clutch kit.


Can the clutch on a 1992 GMC 1500 pickup be adjusted if so how?

I'm pretty sure that is a hydraulic clutch, check and see if you have a resivoir under the hood for the clutch. If you don't then it is mechanical and then you can adjust it. Check owners manual


How do you adjust a clutch on a 1985 Nissan Pickup?

If it is hydraulic then there is not an adjustment. If it is one with a cable then on the outside of the firewall is the adjustment. You will need to lenghten it so that you have about 1 inch of free play.


Where is the clutch slave cylinder on a 1994 pickup truck?

The clutch slave cylinder , for a hydraulic clutch , is inside the manual transmission bellhousing


Is there a slave cylinder in a 1982 pickup?

If the clutch is hydraulic, yes. If the linkage is mechanical, no.


How do you adjust clutch on a 1985 dodge truck?

I have a 1985 dodge pickup with a 225 slant six and a 3 speed overdrive transmission how do i adjust the clutch.


How do you adjust the clutch on a 1988 Nissan pickup?

Its hydraulic ,you cant,check your slave cylinder to see if its leaking,its located thru a rubber cover on side of transmission,if leaking replace and bleed,also check clutch master cylinder,if not leaking,then you might need a new clutch kit.


How do you change the master cylinder on a hydraulic clutch on a 93 Chevy cheyenne 1500 pickup?

To change the master cylinder on a 1993 Chevy Cheyenne 1500 pickup with a hydraulic clutch, first, disconnect the negative battery terminal. Then, remove the clutch fluid reservoir cap and drain the fluid. Unbolt the master cylinder from the firewall, disconnect the push rod from the clutch pedal, and remove the hydraulic lines. Install the new master cylinder by reversing these steps, ensuring all connections are secure and refill the reservoir with the appropriate hydraulic fluid.


What type of clutch fluid for a dodge 1959 pickup?

A 1959 truck has a mechanical clutch. A 1995 truck uses Dot 3 brake fluid for the hydraulic control.