0
jack up car, remove wheel, may need a pry bar, remove 2 bottom bolts at bottom of strut. go into trunk area & find top of strut mount and remove the 3 or 4 nuts securing the top. push down hub assembly & pry outward, pull strut down and out. installation is opposite of removal.
What else can I help you with?
Does a 1995 Mercury Tracer have backward threads on bolts?
NO!
How do you replace cigarette fuse 1995 mercury tracer?
There is a separate fuse located above fuse box just for cigarette lighter.
Will the struts on a 1995 Mercury Sable fit a 1995 Ford Taurus?
Yes.
Where is solenoid located for 1995 Mercury Tracer Trio?
on the starter motor.
Does a 1995 Mercury Tracer have an Interferance or non interferance engine?
On a 1995 Mercury Tracer : According to the Gates website ( they make timing belts etcetera ) ( both the 1.8 and 1.9 liter four cylinder engines are NON INTERFERENCE )
How do you remove the ignition tumbler in a 1995 mercury tracer?
3 screws facing the engine
How do you stop the infernal beeping sound on a 1995 mercury tracer?
i have a 95 tracer and i hear the beeping, but i don't know how to stop it i just try to ignore it
What do 12 beeps mean after starting a 1995 Mercury Tracer?
its the seatbelt or something. completely normal.
Is the 1.9 engine on the 1995 tracer low clearance?
According to the Gates website ( they make timing belts etcetera ) The 1.9 liter four cylinder engine in a 1995 Mercury Tracer is NON INTERFERENCE
How much does it cost to replace 1995 Hyundai struts at mechanic?
The price to replace struts tends to vary per location of the vehicle. On average shops change between $75 and 150 dollars per pair on a 1995 Hyundai.
How do you change the ignition switch on a 1995 mercury tracer?
To change the ignition switch on a 1995 Mercury Tracer, first disconnect the negative battery cable to ensure safety. Then, remove the steering column cover by unscrewing the screws and gently prying it apart. Locate the ignition switch, detach the wiring harness, and remove the mounting screws to replace the switch. Finally, reassemble the column cover and reconnect the battery.
What type of transmission fluid do you use for a 1995 Mercury Tracer?
I believe it's dextron/mercron II
