2011 Dodge Ram 1500 brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
How to change third brake light in 2009 Hyundai sonata
BMW servise
remove tail light and reach through
the screws come off and you replace it
Remove the two screws holding the third brake light lens on then remove the lens, it may be stuck but it will pop off. Replace the two bulbs in there by pulling them straight out.
The third brake light on a 2007 Toyota Avalon is replaced by first removing the rear, retaining screws. The wiring harness can then be disconnect and the light bulb removed.
To replace the third brake light on a 2002 Mazda Protege, first, open the trunk and locate the plastic cover for the brake light assembly. Remove the screws or clips securing the cover, then gently pull it off. Disconnect the old light bulb by twisting it counterclockwise, replace it with a new bulb, and reassemble the cover by securing it back in place. Test the brake light to ensure it's functioning properly.
I would guess that both of your brake light bulbs are burned out, and only the high mount bulbs are still working.
the third brake light is direct from brake light switch no fuse
Its a whole led unit replace whole deal not bulb
Take out the two screws and replace one or both of the lamps.
Begin by removing the wiring harness from your third brake light. Remove the third brake light retaining screws. Reverse the process to install your new third brake light.