start by having the key in the on position then scroll your display window to oil life percentage using your dic buttons or trip reset button then press and hold the reset button for 5 seconds. turn off the key and then turn the car back on to see if it clears.
o I want to reset the oil light on my 2007 mustang 6cyl.
well
go to your oil percentage then hit and hold reset button
On mine, you press SETUP twice and then press and hold RESET
To reset the engine light on a 2007 Chevrolet Suburban, you can use an OBD-II scanner to clear the trouble codes. Simply connect the scanner to the vehicle's diagnostic port, turn on the ignition, and follow the device's instructions to erase the codes. Alternatively, you can disconnect the battery for about 15 minutes to reset the engine control module, but this may also reset other settings in the vehicle. Always ensure the underlying issue causing the check engine light is addressed before resetting it.
To reset the change oil light on a 2007 Cadillac CTS, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal slowly three times within five seconds. Then, turn the ignition off and start the engine; the oil change light should be reset. If it remains on, repeat the process to ensure it was done correctly.
How do you reset the oil life light on Mercury Mariner? Dealer didn;t reset at oil change & we are out of state now. Thanks
2007
You will first need to properly reset the light. If this does not reset the light, then you may have to manually press it.
how do u reset service light on 2007 plate bravo
check to see if there is a red button in the fuse box next to the battery. if there is push that and it should reset the oil change light.
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.