reset run flat indicator
To reset the run flat indicator on a BMW 5 Series, first ensure that all tires are properly inflated. Then, turn on the ignition without starting the engine. Navigate to the vehicle settings on the iDrive system, select "Tire Pressure Monitor" or "TPM," and choose the option to reset. Confirm the reset, and the indicator should turn off after a successful reset.
Turn on the key and scroll though the menu on the instrument cluster using the arrow buttons. When the run flat indicator message comes up, push the reset button. Once you do that, it will ask you to confirm the reset.
Magic and luck, with a little skill. Good luck.
If you mean the Flat tire indicator button, it's next to the parking brake.
It just needs an oil change. If you take it to a Honda dealership to get it fixed, they will normally reset it for you. On the 1995 Honda Accord station wagon, the 'maintenance required' indicator is easily reset by using a key to push in the little flat 'button' located near the indicator.
The light comes on the dash right above the odometer.
Put a flat head screwdriver behind the indicator cluster and prize it out. Then just twist out the bulb.
To reset the flat tire light on a 2006 BMW 330i, first ensure that all tires are properly inflated to the recommended pressure. Then, start the vehicle and locate the "SET" button, usually found on the dashboard or near the tire pressure monitoring system (TPMS) indicator. Press and hold the "SET" button until the tire pressure light blinks and then turns off. Finally, turn off the ignition and restart the car to confirm that the light is reset.
Flat - 2005 II was released on: USA: 1 April 2005 (Taos Picture Show)
indicator lamplight sourcereading lightdye laser pumppixel on flat panel displaybacklight on LCD flat panel displayetc.
It is in the Owner's Manual.