answersLogoWhite

0

The reset button is under your left leg, directly behind your knee air bag. It's a large black button with the tire pressure symbol next to it.

Air your tires to the appropriate psi for the 93V or 94V tires. After your tires have the appropriate PSI (usually 32 psi), then press the reset and start your engine.

The warning light may blink but should turn off within a few seconds; driving shouldn't be necessary, unlike many Hondas.

If it still doesn't work, check your spare tire. I know, it went against my thinking, but my light didn't go off with 32 psi on my 2010 Avalon Limited. I checked the spare and it was at 28 psi cold (should be 35 psi?). Anyways, aired it to 32 psi, reset the button, cranked the engine and, what do you know, a few seconds later my warning light went off.

Good luck to all those who read.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you reset the tire pressure ssensor light in a Toyota 2010 matrix?

To reset the tire pressure sensor light in a 2010 Toyota Matrix, first ensure that all tires are properly inflated to the recommended pressure. Next, turn the ignition to the "ON" position without starting the engine. Press and hold the tire pressure reset button, usually located beneath the steering wheel, until the light blinks three times and then turns off. Finally, start the vehicle to verify that the tire pressure light has reset.


How do you reset maintenance light on Toyota Corolla 2010?

How do you reset maint read light on 2010 corolla


How do you reset tire pressure sensor fault on a 2010 Ford Fusion?

To reset the tire pressure sensor fault on a 2010 Ford Fusion, first ensure that all tires are inflated to the recommended pressure. Then, turn the ignition to the "On" position without starting the engine. Press and hold the TPMS reset button, typically located beneath the steering column, until the tire pressure warning light blinks three times. Finally, release the button and start the vehicle; the light should turn off if the reset was successful.


How do you reset the low tire pressure light on a 2010 Ford Escape?

To reset the low tire pressure light on a 2010 Ford Escape, first ensure that all tires are properly inflated to the recommended pressure. Next, turn the ignition to the "On" position without starting the engine. Press and hold the tire pressure monitoring system (TPMS) reset button, usually located under the steering column, until the light blinks three times and then turns off. Finally, start the engine, and the light should remain off if the tire pressures are correct.


How do you reset the tire pressure monitoring light on a 2010 dodge charger?

To reset the tire pressure monitoring light on a 2010 Dodge Charger, first ensure that all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "On" position without starting the engine. Press and hold the tire pressure monitoring system (TPMS) reset button, usually located beneath the steering wheel, until the light blinks three times, then release it. Finally, start the engine and drive for a few minutes to see if the light turns off.


How do you reset the low tire pressure switch on 2010 Scion XB?

To reset the low tire pressure warning light on a 2010 Scion XB, first ensure that all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Press and hold the tire pressure warning reset button, usually located under the steering column, until the light blinks and turns off. Finally, start the vehicle; the light should remain off if the tire pressures are correct.


How do you reset the low tire pressure indicator lighton a 2010 Jeep Patriot?

To reset the low tire pressure indicator light on a 2010 Jeep Patriot, first ensure that all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within ten seconds, then turn the ignition off. Start the engine, and the light should be reset.


How do you reset service indicator for 2010 ML550?

reset service light on 2010 ml 550


How do you reset timing belt light model 2010 toyota coaster bus?

coaster bus how do you reset timing belt light 2010


How do you reset tire pressure light on 2010 Dodge Journey?

the system is very sensitive to cold temperatures. it will trigger in very cold weather so all you have to do is raise the air pressure to the proper psi and the system will then register a new and proper reading and turn off the light. there is no reset.


how to reset holden commodore engine light 2010?

Reset the device by debugging it.


How do you reset the tpms light on a 2010 Honda element?

To reset the TPMS light on a 2010 Honda Element, start by ensuring all tires are properly inflated to the recommended pressure. Next, turn the ignition to the "On" position without starting the engine. Press and hold the TPMS reset button, located under the steering column, until the TPMS light blinks twice and then goes off. Finally, turn off the ignition, then start the engine to confirm that the light has reset.