First things first, if you don't have it done by a woman in khakis wearing a bikini made out of oxen fir manufactured from the himmilayas from Vietnam......your car malfunctions. That being said, most cars, you can just unhook the battery to reset it, but that's a car with a weird brain, take it to a mechanic.
how do you reset check engine light in 2008 buick lucerne
To reset the oil change indicator light on a 2008 Mercedes S550, turn the ignition on without starting the engine. Press the gas pedal three times within five seconds. After that, the oil change indicator light should turn off, confirming that the reset was successful. Finally, turn off the ignition and start the engine to ensure the light remains off.
take a hammer to the light
To reset the service light on a 2008 Mercedes-Benz C180 Kompressor, first, turn the ignition to the "on" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and start the engine to ensure the service light has been reset. If the light remains on, repeat the process.
To reset the service light on a 2008 Mercedes C350, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times and then turn the ignition off. When you turn the ignition back on, the service light should be reset. If it doesn't reset, you may need to repeat the process or consult the owner's manual for further instructions.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
After repair, you reset with a scan tool.
how i reset check enging light manually at mitsubishi fuso 4m50
A scan tool is required.
Fix the cause of the light coming on and the light will reset itself within a few drive cycles.
if your take it to a autozone tell them you have a check engine light and they will tell you whats wrong if anything and reset it take it to autozone and tell them your check engine light is on and they should reset it
A scan tool is required.