remove the screws and pull it hard
On the old-style Tigra, (up to 2001) you have to take the front bumper off, and remove the headlamp from the car. (Unless your hands are the size of a 3 year old's, and as flexible as an octopus tentacle)
To remove the front bumper from a Vauxhall Zafira, first, ensure the vehicle is parked on a flat surface and disconnect the battery. Then, remove any screws or clips securing the bumper, typically located in the wheel arches, under the front, and along the top near the grille. Gently pull the bumper away from the body, taking care to disconnect any wiring for fog lights or sensors. Finally, lift the bumper off completely and set it aside.
remove laguna bumper
take it off and put the new bumper on replacing all screws nuts and bolts from the first bumper
how do I take apart the front suspension for the jounce bumper
Yes, the entire front bumper cover will need removed.
First remove the bumper cover. You need to take off the front grill to get at the plastic retainers that hold the top of the buimber on. There are about four retainers on the bootom of the bumper.
You have to take off your front Save bumper.
that's what I want to know you idiots
undo two or three screws just inside both front wheel arches then where the bonnet meets bumper there are little black plastic gromets , take them out, then pull bumper away from front wings they should pop out of plastic slides then go to front of car and pull complete bumper fowards and off.
The front bumper of a 2000 Honda Civic is held on by several mounting screws. First remove all the screws, then gently pull the bumper off the remaining mounting clips.
To remove the front bumper remove the following: 12 plastic clips, 6 accessuble on the top, 6 accessible on the bottom 6 screws on the bottom. Bumper hangs on a series of hooks (6) just beneath the headlights.