0
What else can I help you with?
Your 1993 Camry uses brake fluid?
You have a leak(s). Check main brake lines and brake cylinders at each wheel.
How can you tell if your brake booster has a vacuum leak?
You can identify a vacuum leak in your brake booster by listening for a hissing sound around the booster area while the engine is running. A hard brake pedal that requires more effort to press can also indicate a leak, as the booster isn't providing the necessary assistance. Additionally, checking for a drop in engine RPMs when the brake pedal is pressed can signal a vacuum leak. If you suspect a leak, visually inspect the vacuum lines and connections for any signs of damage or disconnection.
Why would the fuel leak out of a 1995 neon when it is parked the tank does not leak.?
AnswerCheck fuel filter and fuel lines and fittingssome of the neons were recalled for bad fuel and brake lines
Why does brake pedal go to floor on 1989 4x4?
check your brake fluid level. its probably empty for some reason...leak? If the fluid level is correct than you most likely have air in the brake lines and will need to have the brake lines bled.
What does it mean in your car if all your brake fluid drains and brake pedal will now go to the floor?
You have a leak. It could be from the master cylinder, lines, calipers, hoses, or wheel cylinders. Add fluid, pump the pedal, and look for the leak.
When you put brake fluid in nothing shoots out when you bleed them?
You could be plugged, maybe there is air in the lines, could have a leak somewheres in the lines or other 3 breaks.
Why does the brake pedal on a 98 grand prix feel hard?
Usually when a brake pedal feels more stiff than usual, there is a vacuum leak. The brake lines probably should be bled.
What could cause a loss of brake pressure in your Saturn?
A leak of fluid somewhere. Check all lines and hoses for a leak and fix until the pedal is firm and does not loose pressure
1990 Chevy G20 parking brake indicator light stuck on?
Check the switch and/or make sure the parking brake pedal is all the way up if it is not that might be air in your brake lines or leak
How do you replace pre bent brake lines?
To replace pre-bent brake lines, first, safely lift the vehicle and remove the wheel to access the brake lines. Disconnect the old lines by loosening the fittings with a wrench, ensuring to catch any brake fluid that may leak. Then, align the new pre-bent brake lines with the existing mounting points and connect them securely, tightening the fittings. Finally, bleed the brake system to eliminate any air bubbles and check for leaks before reassembling the wheel.
What causes the brake pedal to go soft?
A leak in the brake system. Fluid has leaked out and air is now in your lines. This can be from a brake cylinder at wheel or in master cylinder, or even worse a rusted brake line. Check and repair it NOW.
Is there a brake fluid sealer that works for brake fluid leaks?
NO, the problem needs to be properly repaired. its not like an oil or antifreeze leak. the basic principle of a brake system is the free movement of fluid through the brake lines. an additive to this system to "stop" a leak would ruin the whole system and be catastrophic to fix. brake leaks are generally an affordable fix.
