answersLogoWhite

0


Best Answer

You have a leak. It could be from the master cylinder, lines, calipers, hoses, or wheel cylinders. Add fluid, pump the pedal, and look for the leak.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does it mean in your car if all your brake fluid drains and brake pedal will now go to the floor?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

1997f-350 brake pedal goes to floor?

ouch,are brakes adjusted correctly/ sit in vehical and pump pedal to get a full pedal,then hold pedal to see if it bleeds off and goes to floor,if it stays, replace shoes and pads if it goes to floor, there is a fluid leak somewhere is there brake fluid in the resevoir/ are there any brake fluid leaks ,check backside of wheels there is a brake fluid pump, on the chassis rail about level with the front of the front door on the left side.if this pump is bad your pedal will go to the floor


Can worn brake pads make your brake pedal to go to the floor?

no you have a brake fluid leak somewere


How do you know if the master cylinder is going out?

The brake pedal will sink to the floor when applied and the brake fluid reservoir remains full.


What causes brake pedal to go all the way to the floor on 1997 stratus?

A brake fluid leak in the system would do that. Check the brake fluid reservoir. If it is empty you are in need of brake work asap!


What happens when you run out of brake fluid?

The brake pedal will go to the floor but will have absolutely no effect on stopping the vehicle. When you push on the brake pedal it moves the fluid through metal tubes (called brake lines) to force the brake pads against the rotor which slows and stops the car. No fluid means nothing is in there to make the brake pads engage the rotors.


Why does brake pedal go to floor sometimes 96 olds aurora?

sounds like overheating of brake line, either from hot pavement, or cat converter. causes brake fluid to boil and loss of pedal.


Why does brake pedal go to floor?

Defective master cylinder, low of fluid, or leak somewhere else in the system.


Why would brake pedal go to floor after engine started?

Low fluid level or defective master cylinder.


How do you tell if my brake lines have a leak?

You will be adding brake fluid to the reservoir often.The brake pedal won't feel firm.The brake pedal may sink to the floor as you are applying steady pressure.Do a visual inspection of the brake lines looking for that wet spot.


Brake fluid is running down the clutch pedal and when you mash the pedal the pedal remains on the floor?

Actually if the fluid is coming down the clutch pedal it is probably your clutch master cylinder going bad or the seal around it. No worries it is a cheap fix. If it is coming down the clutch pedal it has nothing to do with your brakes. Some people well most use brake fluid for the clutch.


If your brake fluid reservoir is low will that affect your brake pedal travel?

if the vehicle has a low brake pedal, check for brake fluid leaks, or out of adjustment brakes. if it is just low on fluid, check for worn out brake linings.


Why does brake pedal go to floor on 1989 4x4?

check your brake fluid level. its probably empty for some reason...leak? If the fluid level is correct than you most likely have air in the brake lines and will need to have the brake lines bled.