0
take key out of ignition and then press and hold the mileage reset button then insert key and turn on ignition whilst still holding the button down till lights on dash come on then hold till "insp" light comes on then light will reset it self. also these instructions are in the drivers handbook
What else can I help you with?
HOW TO Reset service light on corsa 07 plate?
To reset Corsa D 57 plate do the following, put your foot on the brake pedal then press and hold the odometer button in. Wait until Insp 0 comes on the display, then switch on the ignition wait a few seconds. Now it should display Insp 19000 (depending on service interval). Release button and brake pedal, now switch off ignition. Next time you turn on ignition the Insp 0 should no longer show on the display. This did work for me.
Reset the service indicator lamp on opel combo?
with the switch off, press and hold the odometer button. Turn the switch on, and the odometer will be in insp mode. mode. Press the odometer button until the indicator shows --- . Turn the switch off and the lamp should be reset.
How do you turn off the maintenance light on a 2006 Toyota Tundra?
Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash!!!!!!
How do you reset inspection2 symbol on astra?
foot on brake , hold trip reset in and turn on ignition after 10 seconds insp will reset then you can release all!
How do you dim the dashboard light display in a 2009 corolla?
Turn the nob on the right side of the odometer.
How do you get the odometer to display on a 2007 Ford Freestar?
To display the odometer on a 2007 Ford Freestar, turn the ignition key to the "On" position without starting the engine. Then, press the "Trip" button located on the instrument panel until the odometer reading appears. If the display cycles through trip and fuel economy information, continue pressing until the standard odometer reading is shown.
How do you reset 05 reg astra inspection warning?
hold down mileage reset button and turn on ignition until insp turns to four dashes
How do you reset maintenance required light on 2009 Toyota tacoma?
With odometer reading selected (not trip A or B) turn key to LOCK and remove key (not sure if this is necessary) insert key, hold down odometer button while you turn key to ON position. Continue to hold down odometer button. Odometer display will show ------ then blank, your Maintenance Required light will turn off and your old odometer reading will return.
How do you reset English from metric on 1999 Toyota solara?
To reset the display from metric to English on a 1999 Toyota Solara, turn on the ignition without starting the engine. Press the odometer button until the odometer reading appears. Then, while holding the odometer button, turn the ignition off and back on again. Continue holding the button until the display changes to the desired unit of measurement.
How do you change odometer display to kilometer from miles on 2005 Nissan Titan?
To change the odometer display from miles to kilometers on a 2005 Nissan Titan, turn the ignition key to the "On" position without starting the engine. Press the trip reset button on the dashboard until the odometer display shows the desired unit of measurement. This should toggle between miles and kilometers. If the display does not change, consult the owner's manual for further instructions.
How do you reset the maintenance gauge on the S320 1999 model?
Turn key to position 1. Make sure main odometer and trip odometer are displayed. Press up or down arrows on steering wheel to show FSS (flex service) on display. Turn key to on position and press trip odometer reset (R) for 2 seconds. Display will ask if you want to reset FSS. Confirm by holding reset until display shows FSS reset.
How do you change the language display on a 2004 Chevy Tahoe?
Turn on ignition Make sure the odometer is displaying miles Hold down the odometer reset button until the display starts cycling through the language options - English French Spanish. When the display shows the desired language, release the button.
