0
What else can I help you with?
How do you wire two 8 ohm speakers and keep a 8 ohm load?
in parallel No. Two 8 ohm 'speakers in parallel present a 4 ohm load.
What ohms am i running if i have two 4 ohm speakers hooked up to my amp vs two 2 ohm speakers?
Don't know how you have subs wired but should be 4 ohm load is what your amp will see.
How do you use 16 ohm monitor speakers with an 8 ohm powered mixer?
Just use it like an 8 ohm speaker or else connect two 16 ohm speakers in parallel to form an 8 ohm load. Parallel is positive to positive and negative to negative.
How do you wire multiple speakers together?
Speakers can be wired in parallel or in series. Take the speaker wire from the output, and wire the speakers like so: (ignore the squiggles, they represent spaces) ----|------| S S ----|------| For a parallel wiring. This will reduce the impedance of each speaker, though, so two ohm speakers should be used insead of four ohm speakers. Wire them like this: ----| S | S ----| for series wiring. This will increase impedance though, so eight ohm speakers should be bought instead of four. You will be fine using four ohm speakers in either case, but will lose clarity.
How do you wire one 4ohm sub?
You can't. Two 4 ohm speakers in parallel equal 2 ohms, and two in series equal 8 ohms. It is possible to wire four 4 ohm speakers so that the load is 4 ohms though. Put two in series (8 ohms). put the other two in series (8 ohms). Then put the two sets in parallel (two 8 ohm sets in parallel equal 4 ohms).
How do you convert 8 ohms to 4 ohms?
wire two 8 ohm speakers in a parallel circuit!
Can you hook up two 8 ohm svc subwoofers to a one channel amp?
If you connect two 8 ohm speakers to the average car amp, then yes, probably. Most car amps can handle a 4 ohm load, which is what it would be.
If two four ohm single voice coil subs are wired in parallel how many ohms will be on the amp?
Two four ohm speakers in parallel is two ohms. Make sure the amp is rated for that load impedance, or you could damage it.
Is it possible to wire two 16 ohm speakers to a car stereo and if so bridged or in series or parallel or something completely different?
Typical car stereos run speakers at 4 to 8 ohms, so I would wire the two 16 ohm speakers in parallel to get a net 8 ohms. Anything over that would be a little much for a car stereo. You don't need to drive it that hard.
Can you wire 2 16 ohm speakers to 16 ohms?
No. Two 16 ohm speakers connected together are either 32 ohms, if wired in series, or 8 ohms, if wired in parallel. You can, however, connect four 16 ohm speakers in series-parallel to get 16 ohms, with four times the power handling capacity of just one.
Can you connect a 8 ohm speaker for a amp designed for a 4 ohm load?
You can, but the available power will only be about half of rated, and the frequency response will be slightly different. Better would be to connect two 8 ohm speakers in parallel, making an equivalent 4 ohm speaker.
Can you run 4ohm resistor to make 4 ohms speakers 2 ohm?
Yes, you can safely use a 4 ohm amp with one 8 ohm speaker, but you will not achieve full power. The 4 ohm amp is designed to supply a certain voltage into a 4 ohm speaker. Supplying that same voltage to an 8 ohm speaker will result in half the power, or -3dB. For maximum power, use a 4 ohm speaker, or two 8 ohm speakers in parallel.
