At the base of the wiper arm is a small "pin" sticking out. Pull this pin outward to release the entire wiper arm. Reinstall by pushing the pin in.
http://www.ehow.com/video_4936070_install-windshield-wiper-motor.html?pid=1&cp=1 HERE IS WEBSITE WITH VIDEO ON HOW TO REMOVE AND REPLACE WIPER MOTOR
* Pry off the cover for the wiper arm nuts unscrew the nuts and remove both wiper arms * disconnect the windshield washer line remove the single retaining screw release the five push-in retainers and remove the cowl cover * Unplug the electrical connector from the windshield wiper motor * Remove the three wiper motor assembly retaining bolts and remove the wiper motor assembly * Detach the wiper transmission assembly from the wiper motor crank arm * Detach the wiper motor crank arm from the wiper motor assembly * Remove the three wiper motor retaining screws and detach the wiper motor from bracket
Remove plastic cap. Remove nut. Pry up wiper arm.....
Remove the wiper arm retaining clip. The retaining clip will be just below the wiper arm connection. Hold the retaining clip in and the wiper arm will come off.
A wiper arm on a 2001 Honda Civic is screwed on. To remove it unscrew the mounting hardware and take off the wiper arm.
are you serious... life blade off windshield, unclip plastic fastener off the center of the wiper arm, remove wiper, replace in reverse order.
To remove the wiper arms on a 1995 Chevrolet Suburban, first lift the wiper arms away from the windshield to a vertical position. Locate the small retaining nut at the base of each wiper arm and use a socket wrench to remove it. Once the nut is removed, gently wiggle the wiper arm back and forth while pulling it upward to detach it from the splined shaft. Be cautious not to damage the windshield or the wiper motor during the process.
you just pick up the wiper arm
# Raise the rear wiper arm finish cap to expose the wiper arm nut. # Remove the rear wiper arm nut (1). # Lift the rear wiper arm assembly (2) away from the rear window and remove the wiper arm from the pivot shaft. The cap tilts up toward the arm
To remove the spring loaded wiper arm you have to first of all to unscrew the screws. After the screws have been removed, the spring loaded wiper arm can then be removed.
look at the half circle clip on the side of wiper arm. lift the wiper arm and pull the clip out as far as it goes the wiper arm should rest on the clip and now be "locked" up in the air . now you should be able to remove the wiper arm