To fix the transmission on a 1989 Toyota MR2, first diagnose the issue by checking fluid levels, leaks, and any unusual noises. If the problem is with the clutch, you may need to replace the clutch kit, which involves removing the transmission. For internal transmission issues, consider a rebuild or replacement, which requires disassembling the transmission, inspecting components, and replacing worn parts. Always refer to a repair manual for specific procedures and torque specifications.
how to fix speedometer for Toyota mr2
There are 3 generations where the Toyota MR2 was produced. The 1st time was 1984-1989. The 2nd time was 1989-1999. The 3rd time was 1999-2007.
In the 1989 Toyota MR2, the drain plug for the clutch is located on the transmission housing. To access it, you'll typically need to look for a small bolt or plug on the bottom or side of the transmission unit. It's important to ensure the vehicle is securely lifted and supported before attempting to drain the clutch fluid. Always refer to the vehicle's service manual for specific details and procedures.
Four.
Dexron II only
Toyota first showed its concept car which would become the MR2 in October of 1983. The MR2 was officially released in 1984. A second generation of MR2's were released in 1989 (1990 in North America) and a third was released in 1999.
Its the mk2 late 1989-1999 Kind regards www.mr2-Ben.co.uk Toyota mr2 mk2 New & Used Spares
The transmission on a 1985 Toyota MR2 is located at the rear of the vehicle, adjacent to the engine. This mid-engine layout places the transmission behind the engine, contributing to the car's balanced weight distribution and handling characteristics. Specifically, it is a manual transmission in most models, mounted directly to the engine block.
Take the trans out, the clutch is inside the trans ^_^
Sounds like the speedo cable may have snapped www.mr2-ben.co.uk Toyota mr2 mk2 New & Used parts
The Toyota mr2
http://mr2oc.com/