0
What else can I help you with?
How hard is it to replace head gasket on a 2000 amigo?
Having a head gasket replaced on a 2000 Amigo can be replaced but it can be hard depending on if the mechanic has the right instructions. Also, depending on the condition of the head gasket can depend on how hard it is replace the gasket.
How hard is it to replace the rear struts on a Saturn 2002 L200?
how to replace rear struts on a 2002 saturn L 300
How hard is it to replace the oil pan gasket on a 1997 Toyota Camry?
It's not hard but time consuming.
Overheats. pings. rad cap hard to remove?
replace head, head gasket, and head bolts.
How hard to replace front diff on 1998 full size blazer?
very very hard
Replacing a thermostat on a 1998 silhouette where is it and how hard is it to replace?
To replace a thermostat on 1998 Silhouette, locate it under the top hose assembly inside the radiator. It is fairly easy to replace with the right tools.
How much to replace power steering unit 1998 durango?
um that is hard to say
Is it hard to replace a oil pan gasket on a 2003 Ford Taurus?
It is not hard, certainly no more than any large gasket. I have most success by 'gasket gooing' the gasket to pan, then holding pan up and inserting all bolts 2-3 turns first, then start doing up finger tight opposite sides, finally with wrench, still opposite sides.
How do you install a water pump on a 1998 Chevy Venture van?
how hard is it to replace a water pump on a 1998 chevy venture van?
Is it hard to replace head gasket on a pt cruiser?
Yes, it is a very involved project on a car with very little room under the hood.
1996 Saturn SL1 and your oil is coming out the top of your antifreeze tankany ideas on what happened to your car?
Time to replace the engine. Also, need to replace all of the hoses as they are now contaminated and will start to swell. The cause of the oil leaking into the coolant is either a cracked head or a blown head gasket. Unfortunately, it is hard to tell without disassembling the engine for inspection. You can get Saturn engines fairly cheap at wrecking yards but beware that the oil contamination is a common problem with these engines.
How hard is it to replace ERG Valves in a 1998 Mercury Mystique?
Replacing ERG Valves in a 1998 Mercury Mystique is fairly hard because it requires great precision to avoid blocking the EGR passage.
