625ml
Fork oil level 105mm is standard (or 19.4 oz or 572 cc)
According to the Yamaha Service Manual 17.6 US oz/18.3 Imp oz per fork is the standard capacity.
For a 2001 Yamaha YZ250, the recommended amount of fork oil is approximately 486 cc (or 16.4 ounces) per fork leg when using 5-weight oil. It's important to ensure the correct level is maintained for optimal suspension performance, so check the service manual for any specific instructions regarding air gap or oil height. Always use the recommended oil type and viscosity for best results.
The fork oil capacity for a 1999 Yamaha YZ250 is typically around 10.6 ounces (or approximately 310 milliliters) per fork. However, it's essential to check the owner's manual or service manual for specific recommendations, as capacities may vary slightly based on modifications or specific suspension setups. Always ensure to use the correct type of fork oil as specified by the manufacturer.
I belive that the forks on a 250f are the same so that would make it 100mm for a person who would weigh inbetween 160-190lbs.
The YZ250 only needs about three quarters of a liter of oil. This equates to about .79 quarts, or a little over 3 cups.
For the 2000 Yamaha DT175, each fork leg typically requires about 400cc (or 400ml) of fork oil. It's important to check the owner's manual or service manual for your specific model for any variations. Additionally, ensure you use the recommended type and viscosity of fork oil for optimal performance.
750cc's on a ratio cup.
vl250 fork oil quantity
Anything that is high performance 2 stroke oil that's what i use and it works great.
The 2000 Honda CR125 typically requires about 10.6 ounces (or 315 mL) of fork oil per leg when performing a fork oil change. However, it's essential to check the owner's manual for the specific model and year to confirm the exact amount, as it can vary slightly. Additionally, ensure you use the recommended viscosity of fork oil for optimal performance.
400cc 5wt fork oil