For a 1999 Harley-Davidson FXST, the front fork typically requires about 11 to 12 ounces of fork oil per leg, depending on the specific model and modifications. It's essential to use the correct type and weight of fork oil recommended by the manufacturer, usually around 10W or 15W. Always consult the owner's manual or a service manual for precise specifications and procedures.
Fork oil capacity-FXST/c/sb10.2 oz.or301cc FLST/C/F 11.5oz. or340cc
102 cc
According to race tech, for a 170 lb rider, use 285cc per fork.
To float on water the object should have density less than that of water. But fork have density that is much more greater than that of water.Thus, a fork sinks in water.
475ml in eack fork and you should use 10 weight oil.
For a 1999 Harley-Davidson Softail, the front fork oil capacity is typically around 10.5 to 11 ounces per leg, depending on the specific model and whether the forks are stock or modified. It's important to check the service manual for the exact specifications and recommendations for your model. Additionally, ensure the fork is fully compressed when adding oil for accurate measurement.
330ml per fork
vl250 fork oil quantity
4 oz. in each fork.
how much fork oil in a rm 85
10w fork oil. 130-140 ml from top of fork, when fork is fully compressed without the spring inside the fork.
Justin, after researching this question i found that approx 21 oz should go in each fork, but its best to measure the oil from the top of the tube to the oil level based on the shop manual