0
What else can I help you with?
Which tool can you use to measure how much oil to add to a car engine?
The engine dipstick is the only tool you can use to measure how much oil is in the engine.
How do you add engine sealant to an engine?
add it to the oil.
How much engine oil does a 1976 Mercedes 450sl take?
Depending on how many cylinders the engine has determines how much oil the crankcase holds. The more cylinders the more oil is needed. Usually there are between 4 and 5 quarts needed for an engine of this size. DO NOT overfill. Add 4 quarts and check the engines oil while the engine is warm. Add if needed.
Is the oil filter where you add the oil?
No, you add oil at the oil fill cap on top of the engine.
How much oil do you add to gas in 4 stroke engine?
Usually none at all.
How do you add oil to your 1985 Volvo 240 DL engine?
Open the OIL FILLER cap--on the top of the engine- and add oil.
How much oil do you put in a 2001 Chevrolet Blazer?
If it is the 4.3 liter engine and you have drained all the oil out of the engine oil pan and you have replaced the old oil filter with a new oil filter, then you need to add 5 quarts of engine oil to get the proper level in your engine.
What type of oil and how much should you add after changing the oil in a 1992 Dodge Dakota?
Add 4.5 quarts 10w30, start engine, check and adjust level.
How do you add oil to the engine on a 2005 c230 Mercedes Benz?
how to add oil to the engine of a c230 2005 Meredes Benz? Need a diagram of engine
How much oil do you put in your engine?
1.4astra54plate how much oil in the engine Easy to find out. Park the vehicle on a level surface. Drain oil and replace filter. Add 4 quarts oil, start engine and run for 30 seconds, shut down and wait 30 minutes, check oil level and add as necessary to reach the full mark on the dipstick. You now know the capacity.
How much oil goes in craftsman 179 cc engine?
Just add enough oil to reach the full mark on the dipstick.
One way to reduce friction in a car engine is to add an?
One of the ways to reduce friction in a car engine is to add an oil lubricant. The oil lubricant can be mineral or synthetic but they help the engine parts to move without too much ware. Another way would be to add an engine oil cooler.
