To change the oil in a Volvo 240, first, gather the necessary tools and materials, including an oil filter, engine oil (typically 10W-30), an oil pan, and a wrench. Start by warming up the engine for a few minutes to thin the oil, then turn it off and let it cool slightly. Remove the oil drain plug located at the bottom of the oil pan to drain the old oil into the pan. After the oil has drained completely, replace the drain plug, change the oil filter, and refill the engine with the new oil through the oil filler cap. Finally, check the oil level with the dipstick and ensure it’s within the recommended range.
The oil pan is bolted to the bottom of the engine
Not 100% sure about the '87, but there is no PCV valve on the 1986 Volvo 240 2.3L. Flame trap and Oil trap, but no PCV.
How do I change oil and oil filter on 2000 Volvo v40 1.9turbo
Open the OIL FILLER cap--on the top of the engine- and add oil.
Open the OIL FILLER cap--on the top of the engine- and add oil.
met poep
It would depend on if you are doing a "complete" oil change or if you just need to add some oil if it leaks. If doing a complete change, then you would put in 4.5 to 5 quarts. Otherwise, for leakage, you would add what it needs. My Volvo 240 (1986) has a very small and slow leak, so in my experience, anywhere from 1/4 quart to 1/2 quart is normal. Good luck!
1" Wrench or socket on the bottom of the pan.
how do u perform an oil change on the 01 Volvo s40
The 1987 Volvo 240 typically requires about 4.5 to 5.0 liters (approximately 4.8 to 5.3 quarts) of engine oil when using an oil filter. It's always best to check the owner's manual or consult with a mechanic for the exact specifications and to ensure proper maintenance.
long answer: yes
5W-30 in warmer climates, 10W-30 in colder