Try spraying the brake light switch with WD-40 first. If that doesn't fix the situation, then:
. Remove the under-dash panel.
. Locate the switch near the top of the brake pedal and disconnect the wiring harness.
. Remove the switch retaining pin and the white nylon washer from the brake pedal pin, then slide the brake light switch and pushrod off far enough for the outer hole of the switch to clear the pin.
. Slide the switch down to remove it.
replace head light switch on 93 ford explorer
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
how to replace the brake light switch at the pedal of a 2001 ford zx2
the brake light switch is mounted above the brake pedal on the metal lever
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.
Defective or out of adjustment brake light switch.
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
check brake light fuse and brake light switch on pedal
How do you replace a break light switch on 1995 Chevy Tahoe
brake light switch is mounted by the brake pedel remove lower panel above brake pedel and then you will see the switch should be able to turn the switch to replace
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
look on the brake pedal you will see a lil switch there that's the brake light switch