This is dependent on the type of vehicle that you may have. You may have to get the replace the clutch.
there is not adjustment for the clutch, you need to replace it if is bad.
replace the ecm
There is no adjustment on disc brakes. Replace them.
You can adjust the handlebars on your motorcycle, by removing the adjustment pins, on each side of the handlebars. The handlebars will slide up or down. Replace the pin after the adjustment.
Clutch slave is seled unit. replace clutch
YOU CAN"T, There is NO adjustment, Time to replace the clutch
There are 2 screws on the assembly. The center one is for aim adjustment.
hey, take the bolts loose but dont loose the adjustment
This depends on how worn the clutch components are, with some vehicles the clutch requires frequent adjustment to compensate for the friction plate wearing under usage. However if the clutch has been adjusted frequently and the 'slipping' remains, I'm afraid it's time to replace those internals.
In all honesty, it sounds like your car needs a clutch replacement. If the car has high miles or has been driven hard, replace the clutch.
I think the only way to can adjust valves on Toyota engines is to replace them.
You need to replace the entire headlight. Only remove the screws that hold the trim in place. Don't back out the adjustment screws.