0
If your amplifier has 1000 watts how many watts should your sub have and what is the minimum amount?
i had a 1200W amp and i powered 2 mtx 500W subs wired to each other in the box red to red black to black and made it to a 2 ohm bridge load and it worked nice just check the amp to see if it can take a 2 ohm bridge load and if it can you will get X2 bass outta them without harming anything but if it wont just plug it into left or right or just plug both into the amp it should work try turning your music up and if it starts to distort at a low volume then Thar too weak but 500W RMS should be perfect for that
What else can I help you with?
If you have two 1400 watt subwoofers that have a 700 watt RMS should you get an amplifier that has the watts of both of the subwoofers together 2800 or should you get an amplifier with only 1400 watts?
get the 2800
What speakers match a 300 watt 4 channel amplifier?
The ratings for the speakers will depend upon what '300 watts' means. If the amplifier develops 300 watts RMS total across 4 channels, this would indicate 75 watts RMS per channel. Speakers rated at 100 watts should suffice for this amplifier.
How many watts does a alpine 3513 amplifier have?
2x20 Watts
Should your speaker watts be more then your amps?
No, the speaker watts should not be more than the amplifier output in terms of power. It is important to match the speaker's power handling capability with the amplifier's output power to avoid damaging the speakers. It's recommended to have an amplifier that can deliver power within the range recommended for the speaker.
How loud does a monster amplifier get?
A monster amplifier is about 500 watts, which means the amplifier is louder than most.
What amplifier should I get for my 4 Pioneer TS-A1680R speakers -- 220 watts peak and 50 watts RMS?
Scroll down to related links and read "Why there is no such thing as 'RMS watts' or 'watts RMS' and never has been".
Will a 10w amplifier be all right with 180w speakers and are there any risks?
A: No speakers are not at risk. what it maybe a risk is the amplifier if it try to drive 180 watts load. but as long as you keep the level at 10 watts output it should work fine
What size amplifier will power 3 JL audio 8w7's?
1000 watts rms should be plenty
What is an ideal size for a car amplifier?
The ideal size amplifier for a car is between 80 and 100 watts, otherwise if the consumer wanted more sound or more amps the amplifier must be larger watts capacity.
What does an amplifier with 600 watts 2 channel means?
It could be a 2 channel stereo amplifier.
What important factors should I consider when buying an amplifier for my car?
There are a bunch of important factors to consider prior to buying an amplifier for a vehicle. Primarily, you must decide what the amplifier will be primarily used for. If the amplifier will be used for powering subwoofers it would be good to consider the bridged or mono capabilities as well as ohm ratings of the amplifier as well as the draw, or amount of power the amplifier will pull from the car's electrical system. The most important factor in considering an amplifier for powering subwoofers is probably output watts, which will determine the amplifier's power to the speakers and the amount of bass to be transmitted. If the amplifier is to be used to power mid or high range speakers, a multi channel (four or more) amplifier should be considered because of the ability to run multiple sets of speakers or component sets off of the different channels of the amplifier. The considerations inherent to the subwoofer amplifier are also present including watt ouput and power draw, but when selecting a multi cha
I have 3200 watt sub woofers what amplifier should I get with how many watts output?
To power your 3200 watt subwoofers effectively, you should look for an amplifier that can deliver at least 3200 watts RMS (Root Mean Square) power output at the impedance (ohms) of your subwoofers. It's important to match the impedance of your subwoofers with the amplifier to ensure optimal performance. Additionally, consider factors like amplifier efficiency, distortion levels, and compatibility with your audio setup when selecting the amplifier.
