0
What else can I help you with?
How do you know if your blower motor is bad or if you need to just change the resistor?
Use a jumper wire from the battery + (pos) terminal to the positive on the blower motor, and run a - (Ground) wire from ground on the motor, to chassis or frame.
What is the white wire for on your 80cc bike motor kit?
It is an electrical output wire. Connect white to the positive of a device and the negative on the device to ground. Only works then motor is running
How can you check to see if the heater blower is bad on a 1999 grand prix?
You can test your heater blower motor by connecting a ground wire to the ground. Connect a power wire, from the battery to the positive post. If the blower motor turns it is working, and if it does not it is bad.
When was International Motor Press Association created?
International Motor Press Association was created in 1909.
When was International Motor Sports Association created?
International Motor Sports Association was created in 1969.
When was Haynes International Motor Museum created?
Haynes International Motor Museum was created in 1985.
When was Moscow International Motor Show created?
Moscow International Motor Show was created in 1992.
Where are Yamaha bikes made?
Yamaha Motor is located in Iwata, Japan. Some products are manufactured at international plants, such as golf carts, watercraft and utility vehicles in Georgia and small motorcycles in the Philippines for their market. Most international plants only build for the local market and not for export to other countries.
Where is the ground wire to the starter on a 1996 corolla?
There is no ground wire. The casing of the starter itself is considered the ground. Ex. If you take a battery and use jumper cables to touch the positive lead to the wire terminal on the starter, and then touch the negative terminal to the metal casing it will spin the motor.
92 Camry RR window will not go up replaced the motor and register and have power going to it This is from both window switches?
Well lets eliminate the switches for now. Get some extra long wire and hook motor up directly to battery just to see if you can get motor to work. make sure you use positive to positive and negative to negative or ground on motor. If this makes motor work you may want to check switches or possibly a non grounding situation.
How do you ground a motor?
A motor is grounded with a lug in the motor's junction box. The ground wire in the supply cable is connected to this point. This lug grounds the whole motor frame so if a fault to ground occurs, the fault current will return to the distribution panel where the motor's supply breaker will trip and open the circuit.
How could you reverse the rotation of the motor?
The motor will spin the direction that the positive lead is on. So if the shaft is pointing towards you, you will need to put the positive lead on the left side to make it turn counter clockwise.
