0
What else can I help you with?
How do you add a trailer light plug to your 88 mighty max 4X4?
find wiring harness in the back of the vehicle the same one that goes to the tail lights wire it through that wiring harness use test light to make sure you arein the right wiring harness
How do you fix electrical wiring for brake lights for 91 chevey camaro when there is no current to the light bulb?
check wiring from battery to wiring harness to fuse (check fuse also) to harness to brake light. Check ground, too
You bought some LED tail light that plug into the wiring harness How do you remove the stock tail light sockets?
== ==
How do you fix a 2000 Dodge Intrepid trunk light that stays on?
In my case on a 2001 Dodge Intrepid, there were two bare wires in the wiring harness coming into the trunk lid. It was in the area where the wiring harness is clamped to the trunk (left side) just at the lip of the trunk recess. I wiggled that harness and got the dash trunk light to flash on & off. Peeling back the wiring harness cover at that point revealed the bare wires. Taped them off individually, and then retaping wiring harness at that point solved my problem.
Trailer light hookup for a 98 ford explorer?
On the drivers side of the tail light there is a plug. Get up under the bumper and you will see a round plug and you have to do is unplug the plug from the light and plug in the wiring harness. The wiring harness will act like a patch and connects in about 15 seconds. Just make sure you have the right harness. The plug should be round.
How do you change the tail light on a 2002 Trailblazer?
check wiring harness also check for any possable leakage
How do you install the towing light wiring harness on a 2000 Nissan exterra?
very easy .I bought my wires on eBay ,,,the trailer harness plugs right into your lights no cutting at all
How do you replace a brake light swith on a 1995 LeBaron?
Its located on the brake pedal. Unplug the wiring harness and unbolt it and replace it.
How do you replace brake light on a 2003 Acura?
To replace the brake light on a 2003 Acura, first, open the trunk and locate the tail light assembly. Remove the screws or clips holding the assembly in place, then gently pull it out. Disconnect the wiring harness and twist the old bulb counterclockwise to remove it. Insert the new bulb by twisting it clockwise, reconnect the wiring harness, and reattach the tail light assembly.
How do you replace brake light 2002 Lexus lx470?
To replace the brake light on a 2002 Lexus LX470, first, open the rear hatch and locate the tail light assembly. Remove the screws or bolts securing the tail light, then gently pull the assembly out. Disconnect the wiring harness and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the wiring harness, and reattach the tail light assembly with screws or bolts.
On the 1990 240sx the right turn signal light is staying on in the dash and when using the right blinker the hazzards come on and when you turn the lights on the back passenger turn signal stays on?
Sounds like you have a short in your wiring harness for your rear lights. As for your dash turn signal light, your dummy light is just acting up. You probably need a new wiring harness for your rear lights.
Honda Ridgeline brake light trailer wiring?
To properly connect brake lights for a trailer using a Honda Ridgeline, you typically need a wiring harness that matches your vehicle model. The Ridgeline often has a 7-pin or 4-pin trailer connector, and you should ensure that the wiring harness includes a brake light function. Installation involves connecting the harness to the vehicle’s electrical system, usually at the rear, ensuring all connections are secure to prevent any malfunction. Always consult the vehicle’s owner manual or a professional for specific wiring diagrams and instructions.
