no, the bolt pattern on the small block Chevy intake manifold changed in '87 to the vortec head design, but if it doesnt have the centerbolt valve covers, then it will.
under the intake manifold
On a 1995 GMC Jimmy with a Vortec engine, the fuel injectors are located within the intake manifold, specifically under the upper intake manifold assembly. To access them, you typically need to remove the air intake assembly and the upper intake manifold. The injectors are mounted directly to the lower intake manifold and are connected to the fuel rail, which supplies them with fuel.
There is no difference,,,
i am replacing the starter on olds 1995 aurora
The intake manifold is underneath the plastic silver cover held down by four nuts. Take it off and you'll find the intake manifold - also plastic. Even more unusual, the starter is underneath the intake manifold!
you must remove upper intake manifold to access these plugs
It's on the intake manifold.
Follow the Youtube instructions.
On top of the trans underneath the intake manifold.
the intake is the only way.
The connector into the intake manifold of a GM 305 and 350 has been known to be quite fragile. If the connector has broken you have little choice but to replace the manifold.
It is on the intake manifold near the thermostat housing.