Yes as it's still defective, best get it repaired.
get a new light bulb ,take the cover off the light bulb that's broken and replace it.
If you are riding around with a broken tail light you can get a ticket. Since tail lights are inexpensive you should avoid this ticket by fixing your light.
How do you replace a broken tail light cover for a 2005 Nissan Pathfinder ?
Not sure *which* light cover is being asked about, but the "Related Questions" below will cover all 3: headlight, taillight & running light in the front bumper cover
On my 86 reliant there was 2 screews on the crome light cover in front and 2 on the side of the crome cover that had to be taking out then you have to unscreew the light.
Yes you have to replace your broken tail light. If you don't , there is a big chance that the police will stop you and give you a ticket. Because it's not legal to drive around with a white light there.
most times you dont have to.. try to access it from the engine side of the light
depending on year of the car, but generally, you remove the headlight cover (its a rubber cover on the rear of the headlight assembly). you will find the headlight's main/dipped headlight wiring. below this you will find the side light bulb wiring. this follows to a push-in type connector which holds the bulb twist and pull the connector and this should pull out from the holder. here you can next pull out the sidelight bulb. hope this helps.
No. The lens diffuses the light and a bare bulb is not legal
Just open the engine hood, and look behind either headlight that is out, and remove the cover behind the headlight, should probably be a turning cover, turn cover counter clockwise to remove, then un-plug connection for bulb, and remove light bulb. Light bulb will probably be held in by 2 metal spring clips, that are hooked in, just un-hook springs to remove bulb.
If new style you need to remove grill-easy to do- then you see that the light globe is easy to replace.
To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.