I would recommend not spending any money trying to fix them and just buying some glow gauges off of ebay.com which cost about 30 dollars and then u have light again on ur gauge cluster as well as cool looking gauges... also very easy to install yourself!!
you take apart the dash and get to the instrument panel. then you take the instrument panel out and on the back of the panel you'll will see the lights
Side panel on driver's side of instrument panel. To access open driver's door and slide forward panel by pulling on indentation.
All the lights a flashing on the instrument panel on my Chrysler town and country minivan. Why?
To remove the instrument panel from the 1998 Mitsubishi Eclipse, carefully pull back the pod. Take care not to lose any of the clips.
remove plastic around instrument panel . remove screws from instrument panel then pull panel towards you to unplug it this will allow to get to dach lights
my lights didn't go out.
instrument panel lights for 1998 ford explorer the fues is good and when dimmer swtich is good
The instrument panel lights are controlled by the same fuse as the tail lights which is a 15 amp fuse located in the panel in the engine compartment adjacent to the battery. The fuse is only labeled for the tail lights.
The Kia Sorrento instrument panel lights go on and off with the headlights. The headlights go on with an automatic daylight sensor.
The instrument panel is the gauges and warning lights that are in front of the driver and behind the steering wheel
tyleri
might be a bad or loose wire on the headlight switch,or the switch itself may be going bad