24 Foot Lbs on clutch cover bolts. 85 Foot Lbs on flywheel bolts. Use lock tight on both set of bolts.
pressure plate to flywheel bolts - 15 to 24
The torque setting for the pressure plate on the clutch for an s10 2.2 is 33 foot pounds. The torque for the 4.3 is 29 foot pounds.
whats the torque spec for the pressure plate on a 1998 kia sportage?
19lbs ft
depends on the clutch/ pressure plate combo but somewhere in the 1.5"-2" range
To increase torque through the driven plate, you can adjust the friction material or increase the number of friction surfaces on the plate. Additionally, increasing the pressure on the driven plate by adjusting the clutch mechanism can also help increase torque.
55 ft lbs then 120 degrees 55 ft lbs then 120 degrees
Haynes Auto Repair Manual say's Clutch pressure plate-to-flywheel Torque should be 11 to 15 Ft-LBS Hope that helps....
If a manual, bad clutch adjustment, worn clutch plate, worn pressure plate. If an automatic, bad torque converter. On either, check the parking brake.
Bad part, improper instillation, abuse by driver............
The clutch pressure plate bolts are torqued down to 19 Ft Lbs
35 ~ 46 Foot pounds of torque. Pressure plate bolts.