answersLogoWhite

0

I broke the right rear leaf and just clamped them all back together rather than replacing it. I don't haul a lot of weight, and it passes PA inspections (3 years now). There's been no issue with it riding lower or anything like that on that wheel.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you replace 95 grand prix leaf spring?

To replace the leaf spring on a 1995 Pontiac Grand Prix, first, safely lift the vehicle and support it with jack stands. Remove the rear wheels, then detach the bolts securing the leaf spring to the axle and the frame. Replace the old leaf spring with the new one, ensuring all bolts are tightened to the manufacturer's specifications. Finally, reattach the wheels, lower the vehicle, and check for proper alignment.


Lower rear end of 05 Ford Ranger?

The cheapest way (free if you have the tools) is to flip the leaf spring hangers upside down.


A leaf spring swinging shackle is for a what?

Attaching a leaf spring to a chassis


What is a transverse leaf spring?

A set of leaf spring that is so mounted that it is at right angles to the length of the Vehicle is known as the transverse leaf spring.


Why is my Camaro leaning?

Sagging spring, most likely. Depending on the year, coil, or leaf, you will need to replace, or re-arc them.


Does the rear leaf spring go on top or bottom of the rear axle housing on a 2001 Ford Ranger 2wd?

I was looking at the 2001 Ford Ranger Owner Guide , in the Roadside Emergencies / changing a tire section , and the drawing shows the rear leaf springs being ABOVE ( on top ) the axle tubes


What is the eye of a leaf spring for?

the eye of a leaf spring, assuming u mean the eye at end of spring, is used to bolt the spring to the vehicle


Why the plate length varies while going Dow the leaf in leaf spring?

Multiple leafs lets the manufacture vary the load capacity of the vehicle. Not all manufactures use multiples, I think Ford went to a single fiberglass leaf spring on the Ranger PU. Some front wheel drive have one single on the back that runs side to side.


I know you can move the leaf spring in the back of the ford ranger to lower the back end but how would i do it i have a 1996 Ford Ranger XL 5 speed?

Click on the link below Click on Tech Library scroll down to lowering suspensions


Optimized dimensions of a mono leaf composite spring?

optimized dimensions of a mono leaf composite spring


What is the fiber spring from the two rear wheels acting like a leaf spring named?

mono leaf


How do you lower a 4 wheel drive ford ranger?

Smaller and stiffer shocks/springs on the front, remove a leaf spring or 2 on the back and get stiffer shocks/leafs back there as well.