Either a dead short or overload in circuit? Remove all bulbs turn on sigenal switch and replace one bulb at a time until fuse blows then check that socket for short to ground
There is a short in the signal light circuit.
Check the wiring for damage or grounding problems and thoroughly examine the trailer plug if you have one. If you can't find any problems there, check the turn signal switch.
Find out why the fuse is blowing. You have a short or the circuit is overloaded.
The turn signal fuses are located in the fuse box. The turn signal fuses will be in the second column, third from the top.
you dont need to order the fuse for the signal just go into any automotive store annd got the the fuse section and u will find the fuses there
There is an electrical short to ground in the fan switch or in the blower motor itself.
The 50 ampere engine fuses is blowing because more than 50 amperes of electricity is passing through it.
could be that the regulator in the alternate is failing and causing power surges in the electronics and the fuses are blowing to prevent damage to the device and vehicles wiring.
normal size blade fuses
If your 2001 PT Cruiser is blowing fuses and has no turn signals, it could be due to a short circuit in the wiring or a malfunctioning component in the turn signal system. Corroded connections, damaged wiring, or a faulty turn signal switch may also be culprits. It's important to inspect the electrical system for any visible damage and consider testing or replacing the turn signal relay and switch. If the problem persists, consulting a professional mechanic may be necessary for a thorough diagnosis.
Brake light switch runs through your headlight/turn signal seitch in steering column. This switch could be malfunctioning.
Check the fuses.